Beko CM 68201 - Инструкция (Страница 54)

Oven interior
Before switching on again ensure that all controls are
in the OFF position. Take out all trays and the grill out
of the oven. Clean out the interior with a piece of moist,
soapy cloth. Then, clean it once more with a wet piece
of doth and let it to dry.
Do not use dry powder agents for cleaning.
Special cleaners that are commercially available may be
used after carefully reading the warning that are written
on the labels.
Warning!
Never clean the inside of the oven and trays with hard
brushes, steel pads or knives.
Special cleaners that are commercially avaible may be
used after carefully reading the warning that are written
on the labels.
* Catalytic-enamel led models(if available);
The oven interior of this model is coated with catalytic
enamel since the catalytic enamel cleans itsellf, you do
not have to perform an extra cleaning after the cooking
operation.
r * -—■
If your oven obtains steel
rack; To clean the steel rack,
unscrew the 4 screws. After
cleaning operation, assemble
the steel rack to the oven body
again.
Oven door
Wipe over the door outer panel with a cloth wrung out in hot soapy water,
then after wiping with a
cloth wrung out in clear water. Do not use scouring pads or abrasive powder
which may scratch the surface. Take care during cleaning not to damage or
distort the door seal.
Lowering the heating element (available)
Warning! , , ,
Make sure that the heating element * g *
is sufficiently cool before you start
cleaning.
t F * ■ * r Z
1. Unlock the heating elementby
turning the screw at the selling of the
oven cavity.
Warning!
Never switch on the heating element or
place any wright on it when the heating
element is in the lowered position.
2. After cleaning, move the heating
element upward and screw it to the
ceiling of the oven cavity.
W- ^
24