Rotary commander rm-x4s, Selecting auxiliary equipment, Adjust the volume level – Инструкция по эксплуатации Sony CDX-GT617UE

Страница 14: Attaching the label, Location of controls, Changing the operative direction

Advertising
background image

14

Selecting auxiliary equipment

1 Press (SOURCE) repeatedly until “AUX”

appears.
Operate by the portable device itself.

Adjust the volume level

Be sure to adjust the volume for each connected
audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

“AUX REAR IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Press the select button repeatedly until “AUX”

appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how
you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary
commander control the same functions as those
on this unit.

The following controls on the rotary commander
require a different operation from the unit.

PRESET/DISC control

The same as (1)/(2) (GP/ALBM –/+) on the
unit (push in and rotate).

VOL (volume) control

The same as the volume control dial on the unit
(rotate).

SEEK/AMS control

The same as (SEEK) –/+ on the unit (rotate, or
rotate and hold).

Changing the operative direction

The operative direction of the controls is factory-
set as shown below.

If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SEL).

SEL

DSPL

MODE

SEL

DSPL

MODE

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease

Advertising