Cyborg – Инструкция по эксплуатации Mongoose Cyborg

Страница 14

Advertising
background image

Two Way Car Alarm System MONGOOSE CYBORG

19

ENGLISH

more. I.e. every 1st, 3rd, … pressing of the button 3 will preset the Door operated Anti hi
jack, and every 2nd, 4th, … pressing of the button 3 or the ignition switched off before
door is opened with the ignition on will cancel that presetting. If you preset the Anti Hi
jack with pressing button 3 with the ignition on the siren beeps once and the indicators
will flash once as confirmation that the Wait to Anti Hi jack period is turned on, the
Anti Hi jack will start as soon as the door is open.

To have option a) the User’s Function 1 8 is to be ON, to have option b) the User’s Function

1 8 is to be OFF.

Hi Jacking Mode Deactivated
The Anti Hi Jacking mode is completely deactivated when Anti Hi jacking mode function

is off, and button 3 of the transmitter has not been pressed with the ignition on or pressed 2, 4,
6, … times.

Anti Hi Jacking Mode is switched ON
If the Hi jacking mode is set either by programming or by pressing button 3 for 3 seconds it

will operate as follows:

1. After a door is opened with the ignition switched on the indicators will flash once and the

LED will start to flash, this is a 30 second Grace period to allow you to enter units digit of

the PIN code or press the passive Immobiliser disarm button (buttons). As soon as
the incorrect transmitter button is pressed twice the transmitter operation will be
blocked for 2 minutes as well as if the incorrect code is entered a second time then
the PIN code procedure will be blocked for 2 minutes.
The LCD Transceiver will emit an audible and/or vibration signal and the Anti Hi jack
indication will appear on the LCD screen.

2. After the Grace period the siren will emit 1 beep every 3 seconds to remind you
the system entered the Anti Hi Jack mode.

The LCD Transceiver will change the indication.

This Warning period lasts 30 seconds and you can exit the Anti Hi jack with

units digit of the PIN code entered in the same way as while in the Grace period or
the passive immobiliser disarm button pressed. As soon as the incorrect transmitter
button is pressed twice the transmitter operation will be blocked for 2 minutes as
well as the incorrect code is entered a second time, then the PIN code procedure
will be blocked for 2 minutes
3. After the warning period, the indicators will flash and the siren will sound.
4. The siren will continue to sound and the immobiliser depending on the setting of

the Installer’s Function 4 6 will either remain disengaged until the ignition is switched off
or operate in accordance with the Blocking in Trouble Simulation procedure.

5. As soon as the ignition is turned off, the immobiliser will engage, the siren will stop

sounding but the indicators will continue to flash.

6. To exit the Anti Hi jacking procedure, you must enter the PIN code using the override

switch. All transmitters will be ignored during the Anti Hi jacking procedure.

Руководство пользователя

CYBORG

42

Индикация тревоги

Событие

Пиктограмма

Звуковое подтверждение

Вибросигнал

Открыт капот

Мелодия 1

1раз/5 сек.

Открыт багажник

Мелодия 2

1раз/5 сек.

Открыта дверь

Мелодия 3

1раз/5 сек.

Включено зажигание

Мелодия 4

1раз/5 сек.

Предварительная зона датчика

2 тональный

1 раз

Основная зона датчика

Мелодия 5

1раз/5 сек.

Несанкционированное снятие с охраны

Мигает

Мелодия 6

Переподключение питания в режиме охраны

Мигают пиктограммы

Мелодия 5

1раз/5 сек.

фонарей

Неотключен пассивный иммобилайзер

Индикация текущего

Мелодия 5, если все закрыто

Или

состояния автомобиля

и зажигание выключено

Неправильное отключение иммобилайзера

Или Мелодии 1,2,3 или 4

в зависимости от текущего

состояния системы

Advertising