Sony DCR-TRV520E - Инструкция (Страница 87)

87
Customizing Your Camcorder
Выполнение индивидуальных установок на видеокамере
Changing the menu settings
Icon/item
HiFi SOUND
TBC*
TBC stands for “Time Base Corrector”.
DNR*
DNR stands for “Digital Noise Reduction”.
AUDIO MIX
NTSC PB
PB MODE
A/V t DV OUT
Mode
z STEREO
1
2
z ON
OFF
z ON
OFF
—––
z ON PAL TV
NTSC 4.43
z AUTO
/
z OFF
ON
Meaning
To play back a stereo tape or dual sound track tape
with main and sub sound
To play back a stereo tape with the left sound or a
dual sound track tape with main sound
To play back a stereo tape with the right sound or a
dual sound track tape with sub sound
To correct jitter
To not correct jitter Set TBC to OFF when playing back
a tape on which you have dubbed over and recorded
the signal of a TV game or similar machine.
To reduce picture noise
To reduce a conspicuous afterimage when the picture
has a lot of movement
To adjust the balance between the stereo 1 and stereo
2
To playback a tape recorded on your camcorder on a
PAL system TV
To playback a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
To automatically select the system (Hi8/standard 8 or
Digital8 ) that was used to record on the tape, and
play back the tape
To play back a tape that was recorded in the Hi8/
standard 8 system when your camcorder does not
automatically distinguish the recording system
To convert digital video signals into analog video
signals via your camcorder
To convert analog video signals into digital video
signals via your camcorder
“A/V
t DV” appears on the LCD screen or in the
viewfinder. (p. 77)
POWER
switch
VTR/PLAYER
VTR/PLAYER
VTR/PLAYER
VTR/PLAYER
VTR/PLAYER
VTR/PLAYER
VTR
* When you play back tapes recorded in the Hi8/standard 8 system only.
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8 system.
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
– you turn the POWER switch.
ST1 ST2
(DCR-TRV620E
only)