Sony DCR-VX2100E - Инструкция (Страница 161)

161
Customizing Your Camcorder /
Bыполнeниe индивидyaльныx ycтaновок нa видeокaмepe
Changing the menu settings
Icon/item
CM SEARCH
TAPE TITLE
TITLE DSPL
TITLEERASE
ITEM ERASE
ERASE ALL
REC MODE
AUDIO MODE
Mode
z ON
OFF
z ON
OFF
—
—
—
z SP
LP
z 12BIT
16BIT
Meaning
To search using cassette memory (p. 95, 97, 99, 101).
To search without using cassette memory.
To label a cassette (p. 151).
To display the title you have superimposed.
Not to display the title.
To erase the title you have superimposed (p. 147).
To erase each item’s data in cassette memory
(p. 153).
To erase all the data in cassette memory (p. 155).
To record in the SP (Standard Play) mode.
To increase the recording time to 1.5 times the SP
mode.
To record in 12-bit mode (two stereo sounds).
To record in 16-bit mode (one stereo sound with
high quality).
POWER switch
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing back the
tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may
occur in pictures or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master mini DV
cassette so that you can get the most out of your camcorder.
•You cannot make audio dubbing on a tape recorded in the LP mode. Use the SP mode for the
tape to be audio-dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in the LP
mode, the playback picture may be distorted or the time code may not be written properly
between scenes.
Notes on AUDIO MODE
•You cannot dub an audio sound on a tape recorded in the 16-bit mode.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO
MIX.
(continued on the following page)