Инструкция по эксплуатации Sony PSP-1008
Страница 14
14
Before requesting service
Black or continuously lit pixels on the screen do not
disappear.
, LCD screens are made with highly precise technology, but in some
cases, black (dark) pixels or continuously lit pixels may appear on
the screen. This is not a system malfunction. For details, see
"Precautions" (
The colour of the screen does not look right.
, If "Theme" under
(Theme Settings) is set to "Original", the
background colour will automatically change at the beginning of
each month.
There is no sound.
, Check that the volume is not set to zero. Try raising the volume.
, Check that the mute setting is not on. Press the sound button on the
system front to clear the mute setting.
, When headphones are connected, no sound is output from the
system speakers.
, See also "There is no sound, or the sound quality from the
The volume does not turn up.
, If "AVLS" under
(Sound Settings) is set to "On", the
maximum volume level is restricted.
Sound quality is poor.
, If the system is used in an area where there are vibrations, or if it
is near strong magnetic objects such as a television, the sound may
be distorted and there may be increased background noise. Try
moving the system to a different location.
The system does not recognise the UMD
®
.
, Check that the UMD
®
is properly inserted (label is facing the
system rear, etc.). Try taking out the UMD
®
and reinserting it.
, Check that the UMD
®
recorded surface is clean. If not, wipe it
gently with a soft cloth.
The UMD
®
does not play properly.
, If moisture condensation occurs, remove the UMD
®
from the
system and do not use the system for several hours until the
condensation evaporates.
Upon starting a UMD
®
, a message recommending an update
is displayed.
, Update the system software. For details on updates, refer to the
Quick Reference booklet supplied with the system.
The Memory Stick Duo™ cannot be inserted.
, Set the Memory Stick Duo™ in the proper direction when
inserting.
Sound
UMD
®
Memory Stick Duo™