Vitek VT-1681 - Инструкция (Страница 8)

8
ENGLISH
3. Accurately install the glass tray (6), aligning its protrusions with the support grooves.
Never install the glass tray with the lower side up.
• Do not impede the glass tray rotation during the operation.
• When cooking products, always use the glass tray, roller ring and tray support.
• Put products and dishes only on the glass tray.
• The glass tray can rotate clockwise/anticlockwise. This is normal.
• If any cracks or chips have appeared on the tray, replace the tray immediately.
Installation
• Before connecting the microwave oven to the power supply socket, make sure that
oven operating voltage and power consumption correspond to the parameters of the
local power supply. Connect the oven to the power supply socket which has reliable
grounding.
• Place the oven onto a flat, stable surface. Try to select a place away from the reach of
small children.
• Install the oven so that to leave no less than 7-8 cm interval between the oven’s back
and side covers and the wall, free space above the oven should be no less than 30
cm.
• Do not remove supports from the microwave oven bottom cover.
• Do not close ventilation openings on the oven housing.
• The microwave oven should be placed away from TV and radios, to prevent interfer-
ence when receiving TV and radio broadcast.
WARNING: Do not install the microwave oven onto a heated surface (kitchen oven) or
other sources of heat. If the microwave oven is broken because of improper use, the
user will be deprived of the free guarantee right.
MICROWAVE OVEN OPERATION
Sound signal
Each pressing of a control panel button is confirmed with a sound signal.
Setting the time
• Insert the plug into the socket – you will hear a sound signal, “0:00” will appear on the
display. You can set time from “0:00” to “23:59”.
1. Press the “Clock/Preset” button, hour’s digits will be flashing.
2. Rotate the knob to set hours from 0 to 23.
3. Press the “Clock/Preset” button to confirm, minute digits will be flashing.
4. Rotate the knob to set minutes from 0 to 59.
5. Press the “Clock/Preset” button to confirm, “:” symbols will be flashing.
Note:
1. If the hours are not set, the current time will not be displayed.
2. If during setting the current time you will press the “Stop/Cancel” button, you will return
to the previous mode.
Microwave cooking
Before starting the cooking, set the needed output power and the cooking time and auto
cooking program.
8
1681.indd 8 1681.indd 8 09.04.2010 15:14:32 09.04.2010 15:14:32