Hyundai H-CMMD4049 - Инструкция (Страница 15)

15
Operation
Band selection
Press BAND/TITLE button on the RC or
BND/ button on the panel to switch to the
bands in the following order: FM1 - FM2 - FM3
– FM4 (OIRT) - AM1 - AM2.
Manual/automatic tuning
• Manual tuning: Press / buttons on
the RC repeatedly to change the frequency
upward or downward step by step.
• Automatic tuning: Press and hold /
buttons on the RC to start automatic seeking for
an available radio station downward or upward.
After being found the station will be played.
Local/distant selector
In radio mode, press LOC/SUB-T button
on the RC to select strong or weak station
reception. LOC appears on the display and only
local stations are available. When you turn it off
both distant and local stations can be received.
The function is invalid in AM bands.
Selecting stored station
In radio mode, press / buttons on
the RC to select the stored station upward/
downward.
Mono/Stereo selector
In radio mode, you can press ST/AUDIO
button on the RC to select mono or stereo
mode. Stereo reception is on when MONO
disappears on the display. It is switched to
mono mode when MONO appears. When the
received stereo signal is weak, switch to mono
mode to improve the signal.
The function is available only in FM bands.
Scanning/memorizing stations
automatically
In radio mode, you can press AMS/MENU
button on the RC or AMS button on the monitor
to scan for several seconds each station
stored in number positions. You can press the
corresponding number buttons, AMS/MENU
button on the RC or AMS button on the monitor
when your desired station is on. And it starts
playing that station.
Press and hold AMS/MENU button on
the RC or AMS button on the monitor; it will
activate automatic storing function. The tuner
automatically selects a station and stores it in
number positions.
To store a station manually, touch SAVE
button when listening.
Goto FREQ
Press GOTO button, and the monitor shows
FREQ. Then press number buttons to input the
needed frequency. The unit will go to the input
frequency.
This function is only available when
GOTO FREQ is set to ON in System
adjustment menu.
RDS background
RDS service availability varies with areas.
Please understand if RDS service is not
available in you area, the following service is
not available.
RDS touchable user interface
In Radio interface, touch RDS button;
following menu will be displayed:
1 2 3
4 5 6
1. ТА button. Touch it to set TA function on/off.
2. AF button. Touch it to set AF function on/off.
3. PTY information window.
4. PTY. Touch it to set PTY function on or off.