Binatone SI-5000 - Инструкция (Страница 5)

5 55 55
ENGLISH
SPECIAL SAFETY MEASURES
! Do not leave the hot iron in a horizontal posi-
tion: place it upright on a heat resistant surface.
! The iron gets hot when in operation: any skin
contact with metal surfaces, vapor or water may
result in burns.
! During operation of the appliance keep children
away from it especially when steam ironing.
! Never iron or steam iron articles being worn by a person.
! Avoid any contacts between the sole plate and plastic fittings of
an article: buttons, zippers, labels, etc.
! Always disconnect the iron from the mains when filling or drain-
ing the water tank.
! Store the iron in a vertical position to avoid damaging the sole
plate.
! The iron should always be connected to a grounded main elec-
tricity supply.
DESCRIPTION
OF COMPONENTS
Figure A:
1. Casing
2. Handle
3. Water inlet opening
4. Water tank cover
5. Water tank with maximum limit mark
6. Spray nozzle
7. Select Knob
8. Display
9. Display Fabric Settings (Figure B) (Figure B) (Figure B) (Figure B) (Figure B)
10.Color Changeable indicator
11.Iron sole plate
BEFORE USE
! Remove all packaging from the appliance.
! If you intend to iron with spray or steam, turn
the Select Knob (7) (7) (7) (7) (7) to the «PRESS PRESS PRESS PRESS PRESS» posi-
tion. Open the water tank cover (4) (4) (4) (4) (4) by push-
ing the Select Knob.
! Fill the tank (5) (5) (5) (5) (5) with water through the open-
ing ( ( ( ( (33333))))). Use the measuring jug for conve-
nience and ease.
Note: If your area has hard water, we recommend you use
cold boiled water. Hold the iron in horizontal
direction and then move the iron from front to back
for about 30 seconds so that anti-calc resin can purify
water effectively.