ZELMER 1600 - Инструкция (Страница 71)

71
118B
HOHW TO EXCHANGE THE OUTLET FILTER: HEPA H11 OR HEPA H13 OR THE
WASHABLE HEPA
− Lift the handle of the vacuum cleaner.
− Take the filter cover by its protruding catches, press the cover (13)
with the thumbs strongly and pull it outwards (A).
− Take the HEPA filter out and put a new one in the place of the
used one. The HEPA filter guarantees an effective vacuuming
during about one year period.
− Put the filter cover so that two protrusions on the lower portion of
the cover come into the holes in the vacuum cleaner, press the
filter cover so that its rear catches snap onto the body.
119B
AFTER THE JOB IS FINISHED
− Take out the cord plug from the network socket.
− Wind the cord by pressing the button . While doing this hold the cord so that it does not get
tangled and the plug does not slam against the body of the vacuum cleaner.
− Disconnect the suction end from the tube.
The vacuum cleaner can be stored upright or in a horizontal position. The hose can remain
fixed to the vacuum cleaner but while stored it can not be bent too much.
72B
THE CLEANING AND MAINTENANCE OF THE VACUUM CLEANER
Before you start cleaning and maintaining the vacuum cleaner make sure the plug is pulled out of the
socket.
Wipe the body and bag chamber if it is necessary using a wet rag (it can be moistened with a dish
washing agent) get them dry or wipe them dry.
Do not use scrubbing agents and solvents.
From time to time, vacuum the suction-brush, small brush, and possibly special accessories using the
crevice nozzle.
120B
WHAT TO DO WHEN ?
If you can hear a characteristic “fluttering” which suggests the safety-valve has tripped ( of
course if the vacuum cleaner is equipped with a safety-bag ):
− check the bag and accessories, remove the clogging cause and exchange the bag
The nozzle can be moved only by applying some force:
− decrease the suction power, the cleaning performance will not get worse
The bag is damaged:
− exchange the bag and the filters
The electricity fuse has tripped:
− check if any other devices are connected to the same electric circuit
− if the net work fuse does trip repeatedly, take the vacuum cleaner to a service shop
The vacuum cleaner will not work, the body is damaged or the cord is damaged
− take your vacuum cleaner to a service point
The vacuum cleaner vacuums poorly:
− exchange the bag and filter
− check the suction tubes, hose and nozzle - remove the clogging cause
ECOLOGY
At the end of the product’s useful life, please dispose of it at appropriate collection points
provided in your country.