Sony Handycam MSAC-SR1 - Инструкция (Страница 10)

10
-EN
If any problems occur while using the MSAC-SR1,
use the following table for troubleshooting. Also,
refer to the operating instructions supplied with
your Handycam if necessary. Should the difficulty
persist, contact your Sony dealer.
An error occurs during “Memory Stick” data
transfer.
mMake sure that the MSAC-SR1 and the PC are
connected correctly with the supplied serial
cable.
mMake sure that no other software is being
executed via the same serial port on the PC.
mIf the software which transfers the “Memory
Stick” data is accidentally terminated, data
transfer between the MSAC-SR1 and the PC may
not be correctly performed. If this happens,
disconnect and reconnect the serial cable.
The picture data cannot be read from the
“Memory Stick”.
mThe “Memory Stick” data cannot be transferred
when 2 or more software applications are
executed simultaneously. While the “Memory
Stick” data is being transferred, do not execute
any other software until the software being
operated has been exited.
A connection error occurs.
mCheck the serial cable setting (COM1 or COM2)
on the PC and ensure that both the software and
serial cable settings are the same. For details,
refer to the operating instructions supplied with
the PictureGear 3.2Lite.
Troubleshooting