Инструкция по эксплуатации Elenberg DW-600

Страница 20

Advertising
background image

0

• Do not abuse, sit on, or stand on the open door or dish-rack of the dishwasher.

The machine may topple over.

• Protect cables and hoses from high temperatures.
• To reduce the risk of injury, do not allow children to operate or play with the

dishwasher.

USING THE RIGHT DETERGENT

Use only detergent specifically made for use in
dishwashers, as other types will cause overfoaming. If
your detergent is old and/or lumpy, throw it away. Old
detergent loses its washing power. Lumpy detergent
won’t dissolve.

HOW MUCH DETERGENT SHOULD YOU USE

That depends if your water is ‘hard’ or ‘soft’.

HARD WATER REQUIRES MORE DETERGENT TO GET DISHES CLEAN.

SOFT WATER REQUIRES LESS DETERGENT TO GET DISHES CLEAN.

The recessed detergent area located on the inside door panel will hold approximately
12 grams of detergent. Follow the detergent manufacturer’s guidelines.

USING A RINSING AGENT

You can help prevent unsightly spots on dishes and
glassware, and reduce drying time by using a rinse
agent. A rinse agent is specially formulated to rinse
away food and detergent residues that can be left
behind on your dishes. Used regularly, a rinse agent
will automatically provide you with cleaner dishes every
time you wash.

To fill the rinse agent dispenser, unscrew the dispenser cap located on the far side
of inner container. Add the rinse agent slowly into the container until it just reaches
the bottom of the filling cap inside the dispenser opening. Replace the cap. The
dispenser automatically releases the rinse agent into the final rinse water.

Note: Clean off large particles of food sediments before placing dishes in the

dishwasher.

HOW TO USE THE WATER SOFTENER
Add dishwasher salt into the softener
The hardness of the water varies from place to place. If hard water is used in the

dishwasher, deposits will be formed on the dishes and utensils.

This appliance is equipped with a water softener which uses a salt specifically

designed to eliminate

the minerals from the water.
HOW TO LOAD THE SALT INTO THE SOFTENER
To unscrew the cap from the softener turn in an anticlockwise direction, the salt

container is located on the right hand side of the inner
tub.

When filling for the first time poor half a pint of water in to

the salt container.

Load 500g of salt into the salt container. This will last for

approximately 30 full wash loads.

Fill the salt into the salt container until a small amount of

Advertising