Saturn ST-CC7107 - Инструкция (Страница 2)

GB
IRON
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn”. We are sure that
our devices w ill become faithful
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause con-
densation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least
1.5 hours before switching it on.If
the unit has been in transit,
leave it indoors for at least 1.5
hours before starting operation.
Important! Read these in-
structions carefully before using
the appliance for the first time,
save them for future reference.
Check the voltage set on the iron
corresponds to the local mains voltage
before connecting the appliance. If
necessary select the correct voltage on
the bottom of the iron.
l Only connect the iron to an
earthed mains socket.
l Do not use the iron if the plug,
cord or the iron itself shown signs
of physical damage, or if the iron
has been dropped.
l Check the cord regularly for
damage
l If the cord or any part of the iron
is damaged it should only be
repaired by a qualified electrician.
l Do not dismantle the iron, there
are no user serviceable parts
inside.
l Never immerse the iron in water
l Keep the iron out of reach of chil
dren
l Never leave the iron unattended
whilst it is connected to the mains
supply
l The soleplate becomes extremely
hot whilst in use and may cause
burns if touched.
l When not in use always disconnect
the iron from the mains supply
l Always place the iron upright when
not in use, do not place on a metal
surface as this will damage the
soleplate.
l Always use the iron on a level
l Only put water into the reservoir,
never use any chemicals.
l This travel Iron is not intended for
regular use
l When placing the iron its stand,
ensure that the surface on which
the stand is placed is stable.
l The iron is not to be used if it has
been dropped, if there are visible
signs of damage or if it is leaking.
l If the power cord is damaged or
defective, it must be replaced by
an authorized service center to
avoid a hazard.
l The appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, un-
less they have been given
supervision or instruction concern-
ing use of the appliance by a per-
son responsible for their safety. It
is not advised to use this ap-
pliance by children under 14.
l Children should be supervised to
ensure that they do not play with
the appliance.
Before First Use
l Remove any stickers, labels and
packing from the iron
l Wipe the soleplate with a damp
cloth prior to use to remove any
residues on the soleplate.
l The first time the iron is used it
may give off some smoke, this is
normal and will cease after a short
while.
Iron brush
(The brush can be selective as-
sembled to use)
1. As shown in figure, to assemble or
disassemble the iron brush;
2. There is a lock-button at the end of
the brush. Note to properly use it
when you assemble or disassemble
the brush.
3. The iron brush has the function of
wiping off hair-ball, woolens and
other similar substance. After us-
ing, unplug the iron .Note to dis-
assemble the brush after the iron
becomes cooling, to prevent
your hands burned by hot soleplate.
2 3