Hyundai H-CDM8031 - Инструкция (Страница 11)

11
Adjusting the system menu
Press and hold for 2 seconds the SEL button, press it or the ► button repeatedly to select the system menu
settings: EQ (FLAT => CLAS => ROCK => POP) => CLK (12 / 24) => CT =>STEREO / MONO => LO /
DX (DX=>LOC) => AREA (OIRT => LATIN => EUROPE=>USA => ASIA => AUST) => V-PGM (0-46)
=> BEEP ON / OFF => CLK ON / OFF => SEEK ALL / RDS =>TA SEEK=> TA VOL=> MASK DPI /
ALL => REG ON / OFF.
Rotate the VOL knob to adjust each setting.
• EQ: you may adjust EQ options (FLAT => CLAS => ROCK => POP)
• CLK: you may choose either 12H or 24H clock mode.
• CT: you choose either 12:00 or 24:00 and set the exact time.
• Stereo / Mono: you may choose either Stereo or Mono mode
• Local/distant (LO/DX): select the LOC and DX mode. The default mode is DX.
-
When you select LOC mode, “LOC” indication appears on the display and only local station is available.
- When you select DX mode, “DX” indication appears on the display and distant station is available.
Note: The initial mode is DX mode.
LOC/DX is functional only for selecting local or distant stations.
• Area (frequency) - the defaulted mode is selected by hardware jumper. Select the area: OIRT => LATIN
=>EUROPE => U.S.A => ASIA => AUST.
• Volume PGM - user can set up an initial volume value. The default value is 12. Every time the unit turned
from POWER OFF to POWER ON status, if the value is more than the current one, change the current
volume value to VOLUME PGM value.
• BEEP MODE
Rotate the VOL knob to select the desired mode: ON or OFF.
- BEEP OFF: disable audible beep tone when any function is accessed.
- BEEP ON: enable audible beep tone.