Hyundai H-CMMD4046 - Инструкция (Страница 7)

7
Installation/ connection
This unit can be installed in any dashboard having an opening as shown on the
picture. The dashboard should be ~ 4.5 – 5.5 mm thick in order to be able to
support the unit.
Installation
1. Insert the HALF SLEEVE into the dashboard (1), and bend the mount
tabs outwards to fix it.
2. If necessary, place the mount strap at the back of the unit and fix it with
the WASHER provided (2).
3. Push the unit into the HALF SLEEVE to hear a click sound.
4. Place the TRIM RING over the unit to complete the installation. Note
that some vehicles may not need a TRIM RING.
Note: according to the depth of the opening, use different length of assemble bar accordingly. If the opening is
too shallow the monitor may be extended out 10 mm from the dashboard.