Sony CDX-C8000R - Инструкция (Страница 37)

37
DIS
• D.Info (Dual Information) – to display the
clock and the play mode at the same time
(on) or to display the information alternately
(off).
• Amber/Green* – to change the illumination
colour to amber or green.
• SA (Spectrum Analyzer) – to change the
display pattern of the equalizer display.
• Dimmer – to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
• Contrast – to adjust the contrast if the
indications in the display are not
recognisable because of the unit‘s installed
position.
• M.Dspl (Motion display) – to turn the motion
display to 1, 2 , or off.
• A.Scrl (Auto Scroll) (page 13)
* CDX-C8000R/MDX-C8500R only
SND
• EQ Tune (Equalizer tuning) – to adjust the
frquency and volume level of equalizer
curve.
• Front HPF (High pass filter for the front pre-
output) – to select the cut-off frequency of the
front pre-output.
• Rear HPF (High pass filter for the rear pre-
output) – to select the cut-off frequency of the
rear pre-output.
• SUB LPF (Low pass filter for the subwoofer
output) – to select the rcut-off frequency of
the subwoofer output.
continue to next page t
Attenuating the sound
Press (ATT) on the rotary commander or
the card remote commander.
“ATT on” flashes momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
Changing the sound and
display settings
The following items can be set:
SET
•Clock (page 9)
•CT (Clock Time) (page 24)
•Beep – to turn on or off the beeps.
•RM (Rotary Commander) – to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander as the factory-set position.
— Select “rev” when you mount the rotary
commander on the right side of the
steering column.
•Multi language (language selection) – to
change the display language to English,
Spanish, Portuguese, or Swedish.