Sony CDX-C8000R - Инструкция (Страница 21)

21
Changing the display item
Each time you press (AF), the item changes as
follows:
AF on y AF off
Notes
• When “NO AF” and the station name flash
alternately, it means that the unit cannot find an
alternative station in the network.
• If the station name starts flashing after selecting
a station with the AF function on, this indicates
that no alternative frequency is available. Press
either side of (SEEK/AMS) while the station name
is flashing (within eight seconds). The unit starts
searching for another frequency with the same PI
(Programme Identification) data (“PI Seek”
appears and no sound is heard). If the unit
cannot find another frequency, “NO PI” appears,
and the unit returns to the previously selected
frequency.
Listening to a regional programme
The “REG on” (regional on) function lets you
stay tuned to a regional programme without
being switched to another regional station.
(Note that you must turn the AF function on.)
The unit is factory preset to “REG on” but if
you want to turn off the function, do the
following.
1
During radio reception, press (MENU),
then press either side of (DISC/PRST)
repeatedly until “REG” appears.
2
Press (+) side of (SEEK/AMS) until
“REG off” appears.
3
Press (ENTER).
Note that selecting “REG off” might cause
the unit to switch to another regional
station within the same network.
To return to regional on, select “REG on” in
step 2 above.
Note
This function does not work in the United
Kingdom and in some other areas.
Local link function
(United Kingdom only)
The Local Link function lets you select other
local stations in the area, even if they are not
stored on your number buttons.
1
Press a number button ((1) to (6)) that
has a local station stored on it.
2
Within five seconds, press the number
button of the local station again.
3
Repeat this procedure until the desired
local station is received.