Hyundai H-MW1320 - Инструкция (Страница 5)

Installation
• Make sure that all the packing materials are removed from the inside of the door.
• Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and
dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact qualified service personnel.
• This microwave oven must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.
• Do not place the oven where heat, moisture or high humidity are generated, or near combustible materials.
• For correct operation, the oven must have sufficient airflow. Keep the oven at least 8cm away f
r om both side walls and 10cm away from rear wall to
ensure the correct ventilation.
• Do not cover or block any openings on the appliance. Do not remove feet.
• The accessories include the distance limiter intended for ensuring the proper distance between the back panel of the oven and the wall for the purpose of
ventilation.
How to install: the lower part of the back panel has two rectangular holes. Install the limiter into these holes and press to latch it until a click (Pic. 1). After
the oven is installed, bring the limiter into operating condition (bent under 90 angle (Pic. 2)).
Pic.1
5