Petsafe Big Cat/Small Dog Pet Door - Инструкция (Страница 52)

52
www.petsafe.net
FI
SV
DA
NO
RU
EN
•When children are present in the home, it is important to
consider the pet door during child proofing activities, the pet door
may be misused by a child resulting in the child accessing potential hazards that may be
on the other side of the pet door. Purchasers/Homeowners with swimming pools should
ensure that the pet door is monitored at all times and that the swimming pool has
adequate barriers to entry. If a new hazard is created inside or outside of your home,
which may be accessed through the pet door, Radio Systems
Corporation recommends
that you properly guard access to the hazard or remove the pet door. The closing panel
or lock, if applicable, is provided for aesthetic and energy efficiency purposes and is not
intended as a security device. Radio Systems Corporation will not be liable for
unintended use and the purchaser of this product accepts full responsibility for oversight
of the opening it creates.
•Power Tools. Risk of severe injury; follow all safety instructions for power tools. Be sure to
always wear proper safety equipment.
•The user, prior to installation, must become familiar with all
building codes that may affect the installation of the pet door and
determine, along with a licensed contractor, its suitability in a given installation. This pet
door is not a fire door. It is important for the owner and contractor to consider any risks
that may be present inside or outside of the pet door, and any risks that may be created
by subsequent changes to your property and how they may relate to the existence and
use, including misuse of the pet door.
•Be sure to use heavy scissors for cutting the tunnel extension pieces.
•If cutting a metal surface, be aware of sharp edges to prevent injury.
•Keep these instructions with important papers; be sure to transfer these
instructions to the new owner of the property.
•If homeowner’s door or other application is not level, the pet door must be marked level
to swing properly.
•When applying cutting template there should be a minimum of 75 mm between
the bottom and sides of the door and the outer edge of the template to maintain the
structural integrity of the door.
•Use a manual screwdriver to tighten screws. Do not overtighten. Overtightening can
warp the pet door frame.
•It is not possible to cut holes in tempered or double pane glass except at the time of
manufacture. Consult a professional glazier or glass manufacturer to install the pet door
in a glass door or window.
IMPORTANT SAFETY INFORMATION
Explanation of Attention Words and Symbols used
in this guide
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related
to personal injury.