SoundMax SM-2402 - Инструкция (Страница 7)

7
Compact disc operations
• Set FUNCTION switch to CD/MP3 position.
• Open the CD door by pressing CD door open button.
• Put a CD into the CD compartment with label side up and close the CD door by pushing it down gently.
Play/pause mode
• Press the PLAY/PAUSE button to start play.
• Press the PLAY/PAUSE button to pause at any track when playing.
• To stop the CD, press the STOP button.
• To remove the CD from the unit open the CD door by pressing CD door open button.
• Always press STOP button before opening the CD compartment.
Skip and search mode
• Press the CD Skip/Search Forward button once to skip to the next track. Press and hold this button to
search for a particular point at high speed forward. Release the button to resume normal play.
• Press CD Skip/Search Backward button once to skip back to the beginning of the current track, twice to
skip back to the beginning of the previous track. Press and hold this button to search for a particular point
at high speed backward. Release the button to resume normal play.
Playback modes
• Press CD mode button repeatedly to switch between different playback modes.
• During playing the mode will change as below:
-
For CD playback: REPEAT 1 => REPEAT ALL => RANDOM => NORMAL.
-
For MP3 playback: REPEAT 1 => REPEAT ALBUM => REPEAT ALL => RANDOM => NORMAL.
Program mode
• Up to 20 tracks can be programmed for disc play in any order or the same track can be repeated up to 20
times.
• Before use, be sure to stop the CD by pressing the CD STOP button.
• Press the CD PROGRAM button. The set is now in memory programming mode, at the first memory
position.
• Select a desired track by using CD Skip/Search Backward and CD Skip/Search Forward buttons.
• Press the CD PROGRAM button again to confirm.
• The set will advance to next memory position.
• Repeat steps described above to enter additional memories into the program if necessary.