Binatone Active XA2020 - Инструкция (Страница 11)

11
ENGLISH
2. Press the ∗∗∗∗∗ button on the handset.
3. Press the SPEAKERPHONE button [15] on the base unit to receive
the call. The handset will automatically disconnect from the call.
Transferring a call between two handsets (only
Twin XA2020)
1. During a call using the handset press the SEC/HOLD button [4].
2. Press the digit button corresponding to the number of the handset
to which you want to transfer the call (for model XA 2020 twin
these numbers are 1 and 2).
3. Press the PHONE button [3] on another handset to receive the call.
Note:
If you transfer a call to another handset and the paged handset
does not answer for 30 seconds, the call is automatically returned to
your handset. If you also do not answer the returned call during 30
seconds, the call is disconnected.
MAIN SPECIFICATIONS
Operating frequency Handset – 39.9375
÷40.1125 MHz
Base unit – 31.0375
÷31.2125 MHz
Operating distance Up to 250 m outdoor
Up to 50 m indoor
Output power Base unit, handset
no more than 10 mW
Battery operating time 80 hours in the Standby mode
7 hours on the Talk mode
Battery charging time – 15 hours
Ambient temperature Operation: from 0 0 C to 40 0 C
Storage: from -20 0 C to 60 0 C
Rechargeable battery Capacity 300 mAh, nickel-cadmium
Voltage Handset – 3.6V
Base unit – input 230V, output 9V