Sven IHOO MT 5.1R - Инструкция (Страница 21)

7. SYSTEM INSTALLATION
Power on and off
Connect the power plug to the power socket of subwoofer and press power button at the rear side of subwoofer; in a few seconds
later indicator blinks. Press standby button
a
on Remote Control or On/Standby
i
key at the front panel on subwoofer to switch
on the system.
Selection of input signal source
AS has 2 inputs: Additional stereo input (AUX) and 5.1 channel input (5.1 CH). Select required sound source with "Input" key
i
on
the front panel or with "Input" button on Remote Control. Press the key on front panel or on Remote Control several times to select
required sound source.
Volume control
Master volume control. Press (+)
m
button or (-)
l
button of M.VOL on Remote Control or use keys Volume+
m
Volume-
l
on subwoofer front panel to adjust general volume of the system.
Central channel, rear and subwoofer volume control. Correct volume adjustment of rear, central and subwoofer channels ensures
sound effect of live music. Adjust the volume of necessary channel on remote control with
f
-
g
buttons for subwoofer channel;
h
-
i
- for central channel and
j
-
k
- for rear channels.
Prologic Surround Sound
This function can be enabled by putting signal on stereo input. Press "Sound" button
d
on Remote Control or "Sound" key
j
on subwoofer front panel to enable this function. Prologic indicator
e
on the front panel will flash. Processed stereo signal will
come to all five satellites and subwoofer. Press corresponding button again to disable this function.
Preset
Press "preset" button
e
on Remote Control to return to original sound settings.
Muting operation
If required press
b
muting button on Remote Control. At this time there is no sound output from loudspeakers and Down
f
and
UP
g
indicators on front panel blink.. If you need recover normal sound, press
b
muting button again or M.Vol+
m
/M.Vol-
l
buttons on Remote control (Up
g
or Down
f
keys on front panel). At this time this unit restores sound.
Standby condition
If not using this unit for a period of time, you can press the standby button on Remote Control
a
or "On/Standby" key on front
panel and the STANDBY indicator on panel will blink. Press the STANDBY button on Remote Control or "On/Standby" key on front
panel once again to make this unit enter the normal operation status. But if you are not using this unit for a long time, it is best to
switch off the power supply of the whole unit, and cut down the power supply.
21
Eng IHOO MT 5.1R