Sony KV-DZ29M91 - Инструкция (Страница 40)

Sony KV-DZ29M91 Group D3 (
GB
-dummy)_2-890-006-E2 (1)
Presetting channels manually
1 After selecting “Manual Program”, select the program
number to which you want to preset a channel.
(1) Make sure “Program” is selected, then press .
(2) Press V or v until the program number you want
to preset appears on the menu, then press .
2
Select the desired channel.
(1) Make sure either “VHF Low”, “VHF High” or “UHF” is selected, then press
.
(2) Press V or v until the desired channel’s broadcast appears on the TV screen,
then press .
3 If the sound of the desired channel is abnormal, select the appropriate TV
system.
(1) Press V or v to select “TV System”, then press .
(2) Press V or v until the sound becomes normal, then press .
4
If you are not satisfied with the picture and sound quality, you may be able
to improve them by using the “Fine” tuning feature.
(1) Press V or v to select “Fine”, then press .
(2) Press V or v to select “Manual”, then press .
(3) Press V,v,B or b until the picture and sound quality are optimal, then press .
The + or – icon on the menu flashes while tuning.
5
If the TV signal is too strong (picture distorted; picture with lines; signal
interference) or weak (snowy picture), you may be able to improve the
picture quality by setting the “Signal Booster” feature.
(1) Press V or v to select “Signal Booster”, then press .
(2) Press V or v to select either “Off”(for picture distorted; picture with lines;
signal interference) or “Auto” (for snowy picture), then press .
VHF Low
Fine:
Signal Booster: Auto
Auto
Select Confirm
Manual Program
Program: 01
TV System: D/K
End
“Channel Setup” setting (continued)
01GB05ADJ-SOEMRus.p65 14/05/2007, 10:33 AM 19
Black