Vitek VT-1205 - Инструкция (Страница 5)

16
• The iron heats up quicker than it cools down. Therefore, start ironing the
articles requiring the lowest temperature such as those made of synthetic
fibres.
• If the fabric consists of various kinds of fibres, you must always select the
lowest ironing temperature of the composition of those fibres.
(E.g. an article consisting of «60% polyester and 40% cotton» should be
ironed at the temperature indicator for polyester (·) and without steam.)
If you do not know what kinds of fabrics the article has been made of, find
a spot which will be invisible when wearing or using the article. Try out the
ironing temperature which is most suitable there.
(Start at a relatively low temperature.)
• Pure woolen fabric (100% wool) may be pressed with the iron set to a steam
position. Preferably set the steam control to maximum position and use a
dry pressing cloth.
• When steam ironing woolen fabrics, shining of the fabric may occur. This
can be prevented by turning the article inside out and ironing the reverse
side.
• Velvet and other textures which rapidly acquire shiny spots should be
ironed in one direction only (with the nap) applying light pressure.
• Always keep the iron moving.
• Silk and other fabrics likely to become shiny should be ironed on the
reverse side. To prevent staining do not use the spray on silk or other deli
cate fabrics.
SETTING THE TEMPERATURE
• Insert the plug in the wall socket.
• Stand the iron upright.
• Set the temperature control dial to the correct ironing temperature as indi
cated in the ironing instructions or in the tables.
• The correct temperature will be reached when the indication light has gone.
The indication light will be on and off from time to time indicating that the
selected temperature is being maintained.
5
• Корпус утюга протирайте сначала влажной тканью, а затем сухой.
• Для чистки подошвы не используйте обдирающие материалы.
• Подошва всегда должна оставаться гладкой. Избегайте контактов с ме
таллическими объектами.
ЗАЩИТНОЕ ОТКЛЮЧЕНИЕ
В случае неисправности термостата срабатывает механизм защитного
отключения, предохраняющий утюг от перегрева. Неисправный утюг
необходимо показать специалисту.
СПЕЦИФИКАЦИЯ
Питание
230В ~ 50Гц
Максимальная мощность 1800 Вт
СРОК СЛУЖБЫ УТЮГА НЕ МЕНЕЕ 3 Х ЛЕТ
РУССКИЙ ENGLISH
8 9
1205new.qxd 01.07.03 14:57 Page 10