Setting and starting a washing programme – Инструкция по эксплуатации Electrolux ESF2450S

Страница 10

Advertising
background image

Programme

Degree

of soil

Type of

load

Programme description

Energy

Save op-

tion

1)

Normal

or light

soil

Crockery

and cut-

lery

Main wash up to 50°C
1 intermediate rinse
Final rinse

Selectable,
no impact
on washing
pro-
gramme.

1) For programmes where the option has an impact, the energy saving is between 10% and 25%.
2) During the 'Auto' washing programme the level of soiling on the dishes is determined by how cloudy

the water is. The programme duration, water and energy consumption levels can vary; this depends
upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The
temperature of the water is automatically adjusted between 45°C and 70°C.

3) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.

Consumption values

Programme

Programme duration

(in minutes)

1)

Energy consumption

(in kWh)

Water consumption

(in litres)

-

1,0

9,0

-

0,5-0,8

5,0-9,0

-

0,63

7,0

-

0,45

6,0

1) The digital display shows the programme duration.

The pressure and temperature of the
water, the variations of power supply

and the quantity of dishes can change
these values.

Setting and starting a washing programme

Set the washing programme with the
door ajar. The washing programme only
starts after you close the door. Until then
it is possible to modify the settings.

Do these steps to set and start a washing
programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting

mode.

3. Press one of the programme buttons.

Refer to the chapter 'Washing pro-
grammes'.
– The programme indicator light comes

on.

– All other programme indicator lights go

off.

– The digital display shows in flashing the

programme duration.

– The phase indicator light for the wash-

ing programme starts to flash.

4. Close the door.

– The washing programme starts auto-

matically.

– The phase indicator light for the wash-

ing programme is on.

When the washing programme oper-
ates, you cannot change the pro-
gramme. Cancel the washing pro-
gramme.

Warning! Only interrupt or cancel a
washing programme if necessary.

Caution! Open the door carefully. Hot
steam can come free.

Cancelling a washing programme
1. Press and hold function buttons B and C

until all the programme lights come on.

2. Release function buttons B and C to can-

cel the washing programme.

At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent
before you set a new washing programme.

10 electrolux

Advertising