Vitek VT-4076 SR - Инструкция (Страница 10)

ENGLISH
10
FUNCTION OPERATION
Function Buttons On the Front Panel
These buttons, function is the same as the corresponding buttons on the
remote control. For the detail information, please see the following texts.
Function Buttons Onthe Remote Control
STANDBY
Press the button to switch the power between normal work mode and
standby mode..
OPEN/CLOSE
To open the disc tray, press OPEN/CLOSE; To close the disc tray, press
OPEN /CLOSE again.
SUBTITLE
Press the button to choose different captions(Requires support from
disc)
GOTO
For DVD discs, press the button to choose the desired title and chapter
and search the desired title time and chapter time.
For Super VCD, VCD,CD discs, press this button to search the desired
disc time and track time and choose the desired track.
Note: During VCD playback, the PBC mode must be set to OFF.
0-9 keys
These keys are used to input the time, as well as title, chapter and track
numbers.
When a numeric item is displayed on the screen, press the 0-9 keys to
select the desired entry, and press ENTER to confirm.
When a VCD is playing(with PBC off), press the 0-9 keys to select a track
directly.
CLEAR
Press CLEAR to delete numbers you have entered.
MENU
During DVD playback, press MENU to display the disc menu of the
current title.
Note: This function is subject to the disc.
During VCD/SVCD playback, press MENU to control PBC ON/OFF.
SETUP
Press the button to enter the system setting menu. Press the button
again to exit the menu.
FUNCTION OPERATION
DISPLAY
Press the button to show the information of the current playing disc.
TITLE
Press the button to enter the appointed title.(Requires disc support)
Direction key(UP/DOWN.RIGHT/LEFT)
Press the keys to move the highlighted bar or cursor on any menu to
your selection.
ENTER
Press the button to confirm your choice on screen.
REV:
During DVD, CD or VCD playback, press REV to scan in reverse.
The player will review the disc at different times speed. Press PLAY/
PAUSE
to resume normal playback.
FWD
During DVD, CD, or VCD playback, press FW to scanD forward.
The player will cue the disc at different speed. Press PLAY/PAUSE to
resume normal playback.
PREV
During DVD, CD or VCD playback, press PREV to play the previous
chapter, title or track.
NEXT
During DVD, CD or VCD playback, press NEXT toplay the next chapter,
title or track.
STOP
Press the button once and the player will be in memory stop state.
Continuously press this button twice and the player will be in complete
stop state.
Play
In pause state or stop state, press the button, the player will be in playing
state.
Pause
In play state, press the button for the first time and the player will be in
pause state.
VOLUME+/-
Press VOL+ to increase volume and press VOL-to decrease volume.
REPEAT
Each press of the REPEAT button will change the repeat mode.
During VCD, CD playback, there are three modes: repeat Single, repeat
ALL and Off.
During DVD, playback, there are three modes: Repeat Chapter, Repeat
Title and OFF.
Note: During VCD playback, the PBC mode must be set to Off
A-B
During playback, press A-B to select point A, press it again to select
point B. The player will repeat the section from A to B automatically.
Press A-B a third time to cancel A-B repeat and clear points A and B.
Note: During CD/VCD/S VCD playback, points A and B must be within
the same track. During DVD playback, points A and B can be selected
from different chapters.
ANGLE
Press the button to view scenes shot from ANGLE DIFFERENCE
ANGLES. (Disc support is required)
MUTE
Press MUTE to turn off the audio, press MUTE again to resume normal
sound.
SLOW
During DVD, VCD or SVCD playback, press SLOW for slow motion
playback. One you press SLOW, the disc will play at different speed.
Press PLAY to resume normal playback.
V-MODE
In the STOP/OPEN TRAY/NO DISC state, Press V-MODE key, you can
select different video output mode.
AUDIO
During DVD/SVCD playback, press AUDIO can select different audio
language. During DVD/SVCD playback, AUDIO key acts as L/R key to
switch LEFT/RIGHT/ MIX/STEREO.
RETURN
When SVCD/VCD disc playing,press RETURN button to the main
menu(PBC ON only).
PROGRAM (valid only while DVD/VCD/SVCD playback)
The Program Playback option allows entering the order in which the
chapters or tracks will be played, up a maximum to 16.
Press Program button to display the Program Menu. According to the
highlight, move the cursor to the chapters/tracks you want to play,
then press ENTER to confirm. Then press Play or use arrow buttons to
highlight the PLAY Item and press Enter. The chapters/tracks will play
in the programmed order. During Program Playback, if Program button
pressed, the programmed order and the contents will be displayed on
the screen, and the Program Playback will be stopped. Also Stop
and Play can be pressed to resume normal playback. To clear the
programmed order, use arrow buttons to highlight the CLEAR Item,
then press Enter to modify the programmed order, use arrow buttons to
highlight the modifying item and enter the new chapter/track you want to
program directly.
ZOOM
As you press the button you view the different ZOOM magnifications of
the picture.
Note: This function may differ for different types of discs
RANDOM
During DVD, VCD or CD playback, press RANDOM button for random
sequence playing.
4076new.indd 10 29.10.2008 10:39:47