Инструкция по эксплуатации ViTESSE VS-761

Страница 5

Advertising
background image

P/8

P/7

Hold the dust receiver tank over your dustbin and push the interlock device
back. This action will open the bottom of the dust receiver tank, which will
release its contents into the bin.

Note if the dust receiver tank is very full, it is recommended that a bag be
pulled over the tank so that the tank can be emptied into the bag first. This
avoids excessive dust being released.
Once the tank is empty it is recommended that the Filter be cleaned if
necessary.

Carefully turn the Filter in an clockwise wise direction, until it disengages.
Now remove the Filter.

Clean the Filter thoroughly. Never clean the Filter using soap or any other
cleaning fluid. This would destroy the filter!

If the Filter is heavily soiled, and this is leading to a reduction in suction
power, it is recommended that the filter be replaced with a new one.

Once cleaning is complete, replace the filter by simply reversing the process
outlined above.

Place the Filter back in the dust receiver tank and turn it carefully in a
anti-clock direction, until it locks in place.

Now place the reassembled dust receiver tank back in the cyclone vacuum
cleaner, ensuring that it clicks into place. Your cyclone cleaner is now ready
for use.

Exhaust filter:

Remove the plug from the wall socket. (Never pull on the cable, always
apply light pressure to the plug housing)

Remove the exhaust air filter cover by pressing the interlock release
button.

Take out the exhaust air filter and rinse it well under cold, clean water
before leaving to dry. Never clean the exhaust air filter using soap or any
other cleaning fluid. This would destroy the filter!

Reposition the exhaust air filter.

If the exhaust air filter is heavily soiled, it is recommended that the filter
be replaced with a new one.

Replace the exhaust air filter cover.

Cleaning the cyclone vacuum cleaner:
As and when necessary, the cyclone vacuum cleaner may be wiped clean
using a damp cloth and a little mild cleaning fluid. Never use abrasive
cleaning fluids as these could damage the appliance surface. Ensure the not
fluid is allowed to seep inside the cyclone vacuum cleaner. Never place parts
in the dishwasher.

Disposal:
If you wish to dispose of the packaging, please ensure that you do so in an
environmentally friendly manner and take it to a recycling facility. If you wish
to dispose of the device itself at any point, please also do so in an
environmentally friendly manner. This device should not be disposed of
alongside general household waste. Please contact your local waste collection
office or recycling centre. They will be able to advise you further.

Technical Data
Power supply: 230V ~ 50HZ
Power consumption: 2200W

Advertising