Vitek VT-6404 PR - Инструкция (Страница 9)

English
9
. By pressing the Snooze/Light
button, select the upper
temperature limit ( ), the lower
temperature limit ( ) or switch
off this function.
. Use the Max/Min/+ or Select/-
buttons to set the required value.
5. Press the Mode button to
complete settings of the current
mode and to transfer to the
settings of the next mode.
Setting indoor humidity limits
(
setup mode 4 )
1. Press and hold the Mode button
during three seconds to enter the
setup mode you will hear a sound
signal.
. Then press the Mode button
thrice. Digits, indicating the indoor
humidity, will start flashing.
. By pressing the Snooze/Light
button, select the upper humidity
limit ( ), the lower humidity limit
( ) or switch off this function.
. Use the Max/Min/+ or Select/-
buttons to set the required value.
5. Press the Mode button to
complete settings of the current
mode and to transfer to the
settings of the next mode.
Setting outdoor temperature value
limits (
setup mode 5 )
1. Press and hold the Mode button
during three seconds to enter the
setup mode you will hear a sound
signal.
. Then press the Mode button
four times. Digits, indicating the
outdoor temperature, will start
flashing.
. Select the required remote
sensor (1-) by using the Alarm/
Channel
/°C/°F button.
. By pressing the Snooze/Light
button, select the upper
temperature limit ( ), the lower
temperature limit ( ) or switch
off this function.
5. Use the Max/Min/+ or Select/-
buttons to set the required value.
6. Press the Mode button to
complete settings of the current
mode and to transfer to the
settings of the next mode.
Setting outdoor humidity limits
(
setup mode 6)
1. Press and hold the Mode button
during three seconds to enter the
setup mode you will hear a sound
signal.
. Then press the Mode button
five times. Digits, indicating
the outdoor humidity, will start
flashing.
6404IM.indd 9 20.08.2008 15:57:04