Vitek VT-6404 PR - Инструкция (Страница 10)

English
10
. Select the required remote
sensor (1-) by using the Alarm/
Channel
/°C/°F button.
. By pressing the Snooze/Light
button, select the upper humidity
limit ( ), the lower humidity limit
( ) or switch off this function.
5. Use the Max/Min/+ or Select/-
buttons to set the required value.
6. Press the Mode button to
complete settings of the current
mode and to transfer to the
settings of the next mode.
Note: if temperature/humidity values
fall outside the limits, you will
hear sound signals, the values of
the corresponding parameters
will be flashing. Press any key to
switch off sound signals.
SETTINGS IN THE Clock 2 MODE
1. To enter the Clock  mode press
the Mode button, the “ Clock
 ” indication will appear on the
display.
CLOCK 2
. Use the Max/Min/+ or the Select/-
button to set the required value
(shift against the current time, set
in the Clock 1 mode).
Alarms setting
1. To enter the alarm setting mode
press the Mode button, the
corresponding indications will
appear on the display:
or .
. Set the alarm actuation hours by
using the Max/Min/+ button.
. Set the alarm actuation minutes
by using the
Select/- button.
. Set the day of the week by using
the Snooze/Light button.
5. To switch on the alarm press the
Alarm/Channel /°C/°F button, the
“on” indication will appear on the
display.
To switch off the alarm press the
Alarm/Channel /°C/°F button once
again, the on indication will go out.
Note: when the required time is
reached you will hear sound signals,
the corresponding symbols (
or
) will be flashing.
You can switch off the alarm for 8
minutes by pressing the Snooze/Light
button.
To switch off the alarm press
any key (in about one minute the
alarm will switch off automatically).
6404IM.indd 10 20.08.2008 15:57:05