Binatone JE-8500 - Инструкция (Страница 7)

7
ENGLISH
Operation
1. Assembly the appliance (See «Assembly») and plug it in. Before
plugging in make sure that the switch (13) is in «0» position
and that the safety lock (9) is properly locked.
2. Wash the food before processing. You may process the whole small-
size fruits and vegetables (carrots, small apples, tomatoes). It is
necessary to cut large-size fruits and vegetables into pieces of such a
size that they freely pass into the feeder tube of the large pusher (3).
Note: small pusher (1) is recommended for solid products.
Turn the cover of the large pusher (2) anti clockwise to
take the small pusher (1) out. Such processed products
as carrot, beetroot, celery, cucumber, etc) are inserted
into the feeder tube of the large pusher (3).
3. Switch on the juice extractor by selecting the required speed «I»
or «II» with the help of the switch (13). In order to operate the
juice extractor efficiently, use the first speed when extracting juice
from soft food (for example, tomatoes); and the second speed is
recommended when processing hard food (such as carrots).
4. Lower the fruits or vegetables into the feeder tube of the large pusher
(3), carefully pushing them with the pusher; in so doing the motor
should run. Do not push the food into the juice extractor using
excessive force. This will merely reduce the appliance’s efficiency.
5. If in the course of operation the pulp container (6) becomes full,
switch off the juice extractor, disassemble it and clean the con-
tainer from pulp. Assemble the appliance to continue operation.
6. After you finish, immediately wash the juice extractor and thor-
oughly dry its parts.
MAINTENANCE
1. Unplug the juice extractor from the electrical
outlet and disassemble it (see «Disassembly»).
2. Wipe the appliance body with soft damp cloth.
Never immerse the appliance body and
power cord in water or any other liquid.
3. Wash the remaining parts of the juice extrac-
tor in soapy water with a soft sponge. Do not
use stiff brushes and abrasive cleaners. The lid, separating unit,
grater/filter, pulp container are dishwasher-safe.
4. When extracting juice from such food as carrots, etc. the plastic
parts of the juice extractor coming into contact with food may
become stained. To clean the stains, wipe the parts with cloth
moistened with a small amount of vinegar diluted by water –
two or three teaspoonfuls of 9% vinegar per a glass of water –
then wash the parts as usual.
5. To avoid damage, handle the grater/filter (5) carefully. Im-
proper handling of this part may result in its being damaged.
When caring for the grater/filter abide by the following rules:
– The grater/filter should be washed with a soft brush.
– Do not use cleaners containing bleach and metal brushes.
– It is necessary to replace the grater/filter in case of any
damage.