English, Attachments use, Chopper (7) – Инструкция по эксплуатации Binatone FP-705
Страница 5
5
55
55
ENGLISH
4. Press the release (b)
(b)
(b)
(b)
(b) button and attach the casing (2)
(2)
(2)
(2)
(2) to the
lid (4)
(4)
(4)
(4)
(4) by inserting its rear end into the handle of the bowl
(5)
(5)
(5)
(5)
(5) first. Then lower the front part of the casing (2)
(2)
(2)
(2)
(2) onto the
lid until the click. Place the pusher (3)
(3)
(3)
(3)
(3) in the feeding tube of
the lid (4).
(4).
(4).
(4).
(4).
5. Use the pusher (3)
(3)
(3)
(3)
(3) for pushing products through the loading
opening. During the operation, you may use the pusher (3)
(3)
(3)
(3)
(3) to
cover the loading opening to prevent the splash-out of liquid or
food product chips.
Attention: if the kitchen machine suddenly stops operating,
switch the speed to «0» to switch off the appliance,
unplug the appliance from the power grid and allow it
cool down within 15 minutes. After that switch it on
again.
6. Use the speed selector (a)
(a)
(a)
(a)
(a) to choose the required mode of opera-
tion or pulse «Turbo» mode (c).
(c).
(c).
(c).
(c). After completion of the work,
switch to «0» to switch the appliance off, and unplug the power
cord from the power grid.
7. The appliance mills the products very quickly. To avoid exces-
sive milling of ingredients, each time switch on the appliance
for a short period of time.
8. Use mode «1–5» either for grating soft vegetables and fruit, or
slicing solid products. Use the pulse mode («Turbo») for milling
softer products.
9. When you have finished processing, the casing with the motor
(2)
(2)
(2)
(2)
(2) can only be removed from the lid (4)
(4)
(4)
(4)
(4) after the appliance is
switched off. The release button (b)
(b)
(b)
(b)
(b) cannot be pressed when the
appliance is switched on. To remove the casing (2),
(2),
(2),
(2),
(2), press the
release button (b)
(b)
(b)
(b)
(b) and lift the casing off the lid (4).
(4).
(4).
(4).
(4).
Attachments Use
Chopper (7)
1. The chopper (7)
(7)
(7)
(7)
(7) can be used for chopping (meat, vegetables).
2. Remove the chopper holder (8)
(8)
(8)
(8)
(8) off the chopper (7).
(7).
(7).
(7).
(7).
3. Place the adapter (6)
(6)
(6)
(6)
(6) into the bowl on the rod (5)
(5)
(5)
(5)
(5) and fix the
chopper (7)
(7)
(7)
(7)
(7) in the adapter (6).
(6).
(6).
(6).
(6).
4. Make sure that all components of the appliance are properly
installed.
5. Load the food products into the bowl (5)
(5)
(5)
(5)
(5). Pre-cut large pieces
into3x3x3x cm pieces.
6. Put the lid (4)
(4)
(4)
(4)
(4) on the bowl (5).
(5).
(5).
(5).
(5). Fix the lid (4)
(4)
(4)
(4)
(4) by turning it
clockwise until the click. If you install the bowl (5)
(5)
(5)
(5)
(5) or the lid (4)
(4)
(4)
(4)
(4)
improperly, the appliance won’t work.
7. Press the release (b)
(b)
(b)
(b)
(b) button and attach the casing (2)
(2)
(2)
(2)
(2) to the lid
(4)
(4)
(4)
(4)
(4) by inserting its rear end into the handle of the bowl (5)
(5)
(5)
(5)
(5) first.
Then lower the front part of the casing (2)
(2)
(2)
(2)
(2) onto the lid until the
click. Place the pusher (3)
(3)
(3)
(3)
(3) in the feeding tube of the lid (4).
(4).
(4).
(4).
(4).
8. Turn on the appliance by switching the speed control (a)
(a)
(a)
(a)
(a) to
“1–5” position. Processing takes about 10-30 sec.
Note: do not chop very hard ingredients like coffee beans,
nutmeg and ice cubes as the blades can get blunt.