Binatone MGR-3040 - Инструкция (Страница 6)

6 66 66
1. To attach the operating units (15) (15) (15) (15) (15) to the housing (1) (1) (1) (1) (1) insert it
into the opening in the housing, push gently and turn
anticlockwise until it is properly fastened.
2. Put the selected attachment (17, 18) (17, 18) (17, 18) (17, 18) (17, 18) into the operation unit
(15) (15) (15) (15) (15) to fit the slots on the attachment with the projections on the
operation unit. The attachments (17,18) (17,18) (17,18) (17,18) (17,18) should completely go
into the operating unit (15). (15). (15). (15). (15).
3. Push on the product with the pusher (16). (16). (16). (16). (16).
Use of the kebbe attachment
1. Insert the screw (8) (8) (8) (8) (8) into the operating unit (5). (5). (5). (5). (5).
2. Put the two-element Kebbe attachment (14) (14) (14) (14) (14) onto the end of the
screw (8). (8). (8). (8). (8). Make sure the projections on the operating unit (5) (5) (5) (5) (5)
match the slots on the attachment..... Tighten the seal ring (11). (11). (11). (11). (11).
3. Fasten the assembled operating unit (5) (5) (5) (5) (5) onto the housing (1). (1). (1). (1). (1).
4. Place the tray (6) (6) (6) (6) (6) on top of the funnel of the operating unit (5). (5). (5). (5). (5).
The appliance is then ready for operating. A Kebbe recipe is
provided in the “Useful tips”.
Use of the sausage attachment
1. Insert the screw (8) (8) (8) (8) (8) into the operating unit (5). (5). (5). (5). (5).
2. Place the separator (13) (13) (13) (13) (13) and the sausage attachment (12) (12) (12) (12) (12)
onto the end of the screw (8). (8). (8). (8). (8). Make sure the projections on the
operating unit (5) (5) (5) (5) (5) match the slots on the attachment..... Tighten
the seal ring (11). (11). (11). (11). (11).
3. Fasten the assembled operating unit (5) (5) (5) (5) (5) onto the housing (1). (1). (1). (1). (1).
Attach the tray (6) (6) (6) (6) (6).
4. Place the sausage casing on the end of sausage attachment
(12) (12) (12) (12) (12) for filling.
5. Put the sausage mixture into the feed tray (6) (6) (6) (6) (6). Switch on the
appliance. Direct the sausage mixture with the pusher (7). (7). (7). (7). (7).
Sausage casings will be filled automatically.
Use of the circuit breaker
This appliance is equipped with a circuit breaker. This system
will automatically cut off the power supply to the appliance in case
of overloading.
If your appliance suddenly stops running:
1. Pull the mains plug out of the socket.
2. Let the appliance cool down for 10 minutes.
3. Put the mains plug in the socket.
4. Press the circuit breaker button (21) (21) (21) (21) (21) at the bottom to turn the
appliance on.
5. Turn the appliance on with the On/Off button.
CARE AND CLEANING
1. Do not forget to clean the grinder after each
use.
2. Switch the grinder off and unplug it, mak-
ing sure the motor has stopped.
3. Disassemble the appliance (see part “Dis-
mantling”).