ZTE ZXR10 3900E series - Инструкция (Страница 155)

Глава 14 Конфигурация IPTV
Собственность корпорации ZTE. Конфиденциально. 63
через ПО NMS и просмотреть статистику RMON при помощи
команды
show (показать).
ZXR10#show rmon statistics
EtherStatsEntry 1 is active, and owned by rmontest
Monitors ifEntry.1.1 which has
Received 60739740 octets, 201157 packets,
1721 broadcast and 9185 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 32 collisions.
# of dropped packet events (due to lack of resources): 511
# of packets received of length (in octets):
64: 92955, 65-127: 14204, 128-255: 1116,
256-511: 4479, 512-1023: 85856, 1024-1518:2547
ZXR10#
2. На примере ниже показана конфигурация и запуск
записей контроля хронологии RMON.
ZXR10(config)#interface fei_1/1
ZXR10(config-fei_1/1)#rmon collection history 1 bucket 10 interval
10 owner rmontest
ZXR10(config-fei_1/1)#
Просмотр хронологической информации RMON при помощи
команды
show (показ).
ZXR10#show rmon history
Entry 1 is active, and owned by rmontest
Monitors ifEntry.1.1 every 10 seconds
Requested # of time intervals, ie buckets, is 10
Granted # of time intervals, ie buckets, is 10
Sample # 1 began measuring at 00:11:00
Received 38346 octets, 216 packets,
0 broadcast and 80 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions.
# of dropped packet events is 0
Network utilization is estimated at 1
3. На примере ниже показана конфигурация и запуск
записей контроля сигнализации RMON.
ZXR10(config)#rmon alarm 1 system.3.0 10 absolute
rising-threshold 1000 1
Falling-threshold 10 1 owner rmontest
ZXR10(config)#
Просмотр сигнальной информации RMON при помощи
команды
show (показ).
ZXR10#show rmon alarm
Alarm 1 is active, owned by rmontest
Monitors system.3.0 every 10 seconds
Taking absolute samples, last value was 54000
Rising threshold is 1000, assigned to event 1
Falling threshold is 10, assigned to event 0
On startup enable rising or falling alarm
ZXR10#
4. На следующем примере показано, как сконфигурировать
и включить функцию событий.
ZXR10(config)#rmon event 1 log trap rmontrap
description test owner rmontest
ZXR10(config)#