WORX Tools WU376.2 - Инструкция (Страница 9)

Cordless Hammer Drill ENG
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have the
power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from intended could
result in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a) Ensure the switch is in the off position
before inserting battery pack. Inserting
the battery pack into power tools that have
the switch on invites accidents.
b) Recharge only with the charger
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
c) Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
d) When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
e) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6. SERVICE
a) Have your power tool serviced by
a qualified repairperson using only
genuine replacement parts. This will
ensure that the safety of the power tool is
maintained.
ADDITIONAL SAFETY
RULES FOR YOUR CORD-
LESS HAMMER DRILL
1. Remove the battery pack from the drill before
carrying out adjustments.
2. Do not expose to rain or water.
3. Charger is for indoor use only.
4. Do not store the battery pack in temperatures
over 40ºC.
5. Always charge the battery pack between
temperatures 0ºC to 30ºC. Ideal charging
temperature is 15ºC to 25ºC.
6. Only use the charger and the battery pack
provided no others.
7. Avoid short circuit of the battery pack
connections (screws & nails).
8. Do not incinerate or burn the battery pack, it
may explode.
9. Do not charge a damaged battery pack.
10. Do not charge non-rechargeable batteries.
11. Replace any damaged supply cords on your
charger.
12. Always disconnect the charger power supply
before making or breaking the connections
to the battery pack.
13. Battery pack and charger will be warm
during charging this is normal.
14. When not in use, remove a charged battery
pack from the charger.
15. Always remove the battery pack from the
charger immediately after re-charging is
completed.
16. Your drill and battery pack will be warm
when working, this is normal.
17. Do not dispose of batteries in fire, or with
household waste. Return exhausted batteries
to your local collection or recycling point.
18. Always check walls, floors and ceilings for
hidden power cables and pipes.
19. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
20. Wear ear protection with cordless drill.
Exposure to noise can cause hearing loss.
09 08
UKR-WU376 WU376.1 WU376¡ª060726.indd 9 2006-7-26 14:05:40