Hyundai H-CMD4050G - Инструкция (Страница 15)

15
Operation
the nearest station upwards.
Band selection
Select RADIO mode. Press BAND/PTY
button on the panel or BND/RDM button on
the RC to select the desired band: FM1, FM2,
FM3, AM1 (MW1), AM2 (MW2).
Manual/automatic tuning
• Manual tuning: press SEEK-/ and
SEEK+/ on the RC and hold for 2 seconds
to enter the manual tuning mode. Press these
buttons repeatedly to select a frequency
downward or upward step by step.
• Automatic tuning: press and hold PRESET
/ buttons on the panel or press SEEK-/
and SEEK+/ on the RC repeatedly, the
automatic search will start. It will play when
finds the station.
Programming tuner stations
There are numbered preset buttons on the
RC (1~6), with which you can store and recall
stations for each band (18 FM, 12 AM). Select
a station, then press and hold a preset button.
The station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button
or press PRESET
/ buttons on the panel.
Auto memory store/Preset scan
Auto store: Select a band, press and hold
AS/PS/ button on the panel or P.SCN/RPT
button on the RC to enter auto store mode.
The radio will automatically store 6 stations to
the 6 preset memories of the current band. To
stop auto store, press the button again.
During auto station preset, the unit will
search and store stations with the strong signal
first, and then weaker signal stations until the
memories are full.
Preset scan: Select a band, press AS/PS/
button on the panel or P.SCN/RPT button
on the RC to scan all preset stations in the
memories of the current band. To stop preset
scan, press the button again.
RDS function
RDS (Radio Data System) service availability
varies with areas. Please understand if RDS
service is not available in you area, the
following service is not available, either.
AF (Alternative frequencies) function
Press AF/TA button on the RC to enable AF
function. When the radio signal strength is poor,
enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with stronger signal strength.
AF indicator on the display will flash until
RDS information is received. If RDS service is
not available in your area, turn off the AF mode.
TA (Traffic alarm) function
Press and hold MENU/TA button on the
panel to activate the traffic alarm function.
When TA function is activated, it will search
the station with TA information automatically.
If there is no TA information, it will search the
station with TP information automatically, if
there is no TP information either, it will return to
the previous station after searching.
When receiving the station with TP
information but without TA information,
TP icon is on and TA icon keeps blinking;
when receiving the station with TP and TA
information, both TP and TA icons are on.
When playing in other mode and TA
information is received, it will change to the
radio mode automatically. After playing over, it
will return to the previous mode. Press and hold
MENU/TA button on the panel once to ignore
the received TA information, do it twice to turn
off the function.
PTY (Program type) function
Press PTY button on the RC or press
and hold BAND/PTY button on the panel to
activate the PTY function, press it repeatedly
to show Music group/Speech group/PTY off.
Choose the needed PTY type by pressing the
icon in the touchable screen or pressing the