Petsafe In-Ground Fence PRF-3004XW-20 - Инструкция (Страница 151)

accessories
To purchase additional accessories for your PetSafe ® Stubborn Dog In-Ground Fence™ System, visit our website at www.petsafe.net to locate
a retailer near you and for a listing of Customer Care Centre telephone numbers in your area.
add-a-Dog ® additional Receiver Collars - instructions for use
PiG19-10761 ultralight™ add-a-Dog ® Receiver Collar
Prepare the Receiver Collar
There are two sets of Contact Points that can be used on your receiver. Your Receiver Collar comes with the short
Contact Points installed. The longer Contact Points should be used on dogs with long hair. Tighten the Contact Points
using Test Light Tool
(a) one-half turn beyond finger tight. Check the tightness weekly.
To insert and Remove the Battery
Note: Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe
® battery (RFA-67D-11). This unique battery is designed to make
battery replacement easier and increase water protection.
To insert the battery, align the symbols on the battery (arrow) and Receiver Collar (triangle)
(B). Use the edge of the
Test Light Tool to turn the battery clockwise until the arrow lines up with the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise using the edge of the Test Light Tool
(C).
DO NOT attempt to cut into or pry open the battery. Be sure to discard the used battery properly.
Battery life will vary depending on how often your pet tests the system and receives a Static Stimulation. Check the Receiver Collar every
month to ensure the battery is working properly.
A replacement PetSafe
® battery (RFA-67D-11) can be found at many retailers. Contact the Customer Care Centre or visit our web site at
www.petsafe.net to locate a retailer near you.
a
B
C
www.petsafe.net 151
EN
NO
RU
SV
DA
FI