Инструкция по эксплуатации Planet Technology VIP-154NT
Страница 52
Please refer to the following operate procedures for more understandings to carry out the MAC Clone
function.
1. Please login IP Phone and browse to “Network -> LAN Settings” page. To switch the LAN mode to
NAT mode then press Save&Reboot button to save the settings and reboot machine.
2. Please make sure the network cable of your PC directly connect with PC port of IP Phone, then
re-login IP Phone. (In the NAT mode, the default IP address of PC port is
)
3. Please browse to “Advanced Settings -> MAC Clone Setting” page and enable the MAC Clone
function.
4. IP Phone will prompt if sure want to clone the MAC of your PC to the LAN port of IP Phone.
5. After
Save&Reboot, the MAC of LAN port will become to PC’s original MAC address.
6.
52