Installing the appliance, Fitting the appliance – Инструкция по эксплуатации KORTING OGG741RI
Страница 22
22
Installing the appliance
Installation should be carried out according
to the instructions by a professionally qualifi ed
person. The manufacturer declines all respon-
sibility for any damage to persons, animals or
things due to a wrong installation.
Fitting the appliance
Fit the appliance into its surround (beneath a
work-top or above another appliance) by insert-
ing screws into the 2 holes that can be seen in
the frame of the oven when the door is open.
For the most effi cient air circulation, the oven
should be fi tted according to the dimensions
shown in
fi g. 1.
The rear panel of the cabinet must be re-
moved so that air can circulate freely.
Fig. 1
IMPORTANT
For a built-in oven to work well the cabinet
must be of the right type.
The panels of the adjoining furniture should
be heat resistant. Particularly when the adjoin-
ing furniture is made of veneered wood, the
adhesives should be able to withstand a tem-
perature of 120°C. Plastic materials or adhesive
which cannot withstand this temperature will
become deformed or unstuck.
To comply with safety regulations, once the
appliance has been fi tted it should not be pos-
sible to make contact with the electrical parts.
All parts which offer protection should be fi xed
in such a way that they cannot be removed
without the use of a tool.