Sony DCR-PC100E - Инструкция (Страница 104)

104
Icon/item
CLOCK SET
LTR SIZE
DEMO MODE
WORLD TIME
BEEP
COMMANDER
DISPLAY
Meaning
To reset the date or time (p. 113).
To display selected menu items in normal size.
To display selected menu items at twice the
normal size.
To make the demonstration appear.
To cancel the demonstration mode.
To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The
clock changes by the time difference you set
here. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
To output the beep instead of the melody.
To cancel the melody and beep sound.
To activate the Remote Commander supplied
with your camcorder.
To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR’s remote control.
To show the display on the LCD screen and
viewfinder screen.
To show the display on the TV screen, LCD
screen and viewfinder screen.
Changing the menu settings
POWER
switch
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) at factory and the demonstration starts about 10 minutes
after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than CAMERA, or
set DEMO MODE to OFF.
•When NIGHTSHOT is set to ON, the NIGHTSHOT indicator appears on the LCD screen or in
the viewfinder and you cannot select DEMO MODE in the menu settings.
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a
TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs
on the TV or VCR.
Mode
z NORMAL
2
×
z ON
OFF
z MELODY
NORMAL
OFF
z ON
OFF
z LCD
V-OUT/LCD
VTR
CAMERA
MEMORY