Схемы подключения к центральному замку, Command summary – Инструкция по эксплуатации Hyundai H-SS31
Страница 16
Руководство пользователя и инструкция по установке
H-SS31 Автомобильная охранная система
16
СХЕМЫ ПОДКЛЮЧЕНИЯ К ЦЕНТРАЛЬНОМУ ЗАМКУ
ENGLISH
User’s Guide and Installation manual
H-SS31 Car Alarm System
25
Press button
1
st
2
nd
Press buttons in indicated sequence
3s
Press and hold button for 3 seconds
Smart LED. System Status Indication
Command Summary
Function
Button 1
Button 2
Note
Arm (Lock)
Ignition OFF
Arm without Sensor Warning Zone
At any time when armed
Arm without Sensors
At any time when armed without Sensor Warning Zone
Arm with Sensors re enabled
At any time when armed without Sensors
Silent Arm
2
nd
1
st
Ignition OFF
Silent Arm without Sensor Warning Zone Silent
At any time if the alarm system has been armed in
Silent Mode
Arm without Sensors
At any time if the alarm system has been armed in
Silent Mode without Sensor Warning Zone
Silent Arm with Sensors Re enabled
At any time if the alarm system has been armed in
Silent Mode without Sensors
Disarm (Unlock)
Armed
Silent Disarm
1
st
2
nd
Armed
Lock
Ignition ON
Unlock
Ignition ON
Panic Mode
3s
3s
Armed
Trunk Release
3s
Canceling the Quick Auto rearming
Dependent upon theWithin
3 seconds of Disarming
(The User Authorization)
Program Setting
ARM
LED Slow Short Flashes
DISARM
LED Off
ARMING
LED Quick Short Flashes
PIN CODE BLOCKING PERIOD
LED Double Flashes
Emergency Disarming.
(When no transmitters are available)
The
H-SS31 allows setting of a one digit PIN code. The system LED is used to enter the PIN Code.
How to enter the PIN Code
To override the alarm system when no transmitter is available:
1. Within 7 seconds switch the ignition on/off twice and then switch it on again.
2. The LED will be flashing quickly. After quick flashing the LED will flash in a rate of one flash per second.
3. Count a number of flashes equal to your PIN Code and switch the ignition off.
4. If the PIN Code is correct the alarm system will disarm.
NOTE: If an incorrect PIN Code is entered twice the alarm system will block the PIN Code operation for two
minutes.