Pioneer DVH-390MP - Инструкция (Страница 5)

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT SPLIT COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVI-
CING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with the arrow-
head symbol, within an equilateral tri-
angle is intended to alert the user
about the presence of uninsulated
dangerous voltage within the pro-
duct
’s enclosure that may be of suffi-
cient magnitude to constitute a risk
of electric shock.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important op-
erating and maintenance (servicing)
instructions in the literature accom-
panying the appliance.
Always operate the vehicle in a safe
manner. Do not become distracted by
the vehicle while driving, and always
be fully aware of all driving condition.
Do not change settings, or any func-
tions. Pull over in a safe and legal
manner before attempting such op-
erations.
Do not use for many hours at extre-
mely low or high temperature. (-10°C
to 60°C)
To reduce the risk of electric shock,
do not remove the cover or back of
this product. There are no user-ser-
viceable parts inside. Refer servicing
to qualified service personnel.
Do not allow this unit to come into
contact with liquids. Electrical shock
could result. Also, damage to this
unit, smoke, and overheating could
result from contact with liquids.
The temperature of unit
’s outside can
be extremely high, please use the unit
after proper installation in your vehi-
cle.
Precautions of handling
discs and player
A defective or soiled disc inserted into the unit
can cause the sound to drop during playback.
Handle the disc by holding its inner and outer
edges.
Do not touch the surface of the unlabeled side
of the disc.
Do not stick paper or tape, etc. on the surface.
Do not expose the disc to direct sunlight or ex-
cessive heat.
Clean the disc before playback. Wipe the disc
from the center outward with a cleaning cloth.
Never use solvents such as benzene or alcohol
to clean the disc.
Periodically wipe the contacts on the back of
the control panel with a cotton bud moistened
with alcohol.
Safety note
En
5
English
Section
01