Hyundai H-CDM8035RG - Инструкция (Страница 13)

12 13
Operation Operation
the time indication will blink on the display.
Rotate VOLUME knob or press
/
buttons on the RC to adjust hours. Press SEL/
button to go to setting minutes. Rotate
VOLUME knob or press / buttons on
the RC to adjust minutes. Press button on
the RC or PTY/CLK button on the unit for the
new setting to take effect.
Press button on the RC or PTY/CLK
button on the unit anytime to view the time
display.
Subwoofer control
Press and hold the BND/SUB button to turn
the subwoofer output ON. An external amplifier
is required to operate a subwoofer.
AUX in jack
AUX-in jack is intended for connecting an
external audio or video equipment to amplify
the sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
Radio operations
Band select
Press repeatedly BAND/SUB button on the
panel or button on the RC to select your
desired radio band during RADIO mode: FM1,
FM2, FM3, AM1 (MW1), AM2 (MW2). In each
set of the bands you can store up to 6 preset
stations, making total 30 preset memory stations.
Auto/Manual tuning
Press and hold PREVIOUS/NEXT buttons
on the panel or / buttons on the RC to
automatically adjust the radio frequency. The
radio will seek to the next up or down strong
and clear frequency station. Repeat this action
to seek for other desired stations. To adjust the
needed frequency manually, press repeatedly
PREVIOUS/NEXT buttons on the panel or
/
buttons on the RC.
Programming tuner stations
There are six numbered preset buttons,
under which you can store and recall stations
for each band. Select the needed station,
then press and hold a preset button. The
station will be saved in the memory under
the corresponding number. To recall a stored
station, press the corresponding preset button.
Automatic store/preset scan
Automatic store
Press and hold F/PS button on the panel
or button on the RC. The radio will
automatically store the 6 strongest available
stations to the 6 preset memories of the current
band. To stop auto store, press this button again.
Preset scan
Press F/PS button on the panel or
button on the RC, the receiver will scan the
saved stations in the current band.
Mono/Stereo control (in FM radio
mode)
Press SEL/ button until the display shows
ST ON (ST OFF). Turn VOLUME knob or press
/ buttons on the RC to switch between
ON (stereo reception) or OFF (mono reception).
Improvement of reception of distant stations
can be done by selecting mono mode, which
may cut down some reception noise.
Local radio station search
Press SEL/ button to choose LOC
ON (LOC OFF). When the LOCAL function
is on, the local stations (stations with weak
radio signal) can be played. When the LOCAL
function is off both local and distant stations
(stations with strong radio signal) can be played.