JVC KD-BT1 - Инструкция (Страница 3)

ENGLISH
3
How to reset your unit
• Your preset adjustments will also be erased (except
the registered Bluetooth device, see page 16).
How to forcibly eject a disc
“Please Eject” appears on the display.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
How to use the M MODE and SEL buttons
If you use M MODE or SEL (select), the display
and some controls (such as the number buttons,
4 / ¢ buttons, 5 / ∞ buttons, and the
control dial) enter the corresponding control mode.
Ex.: When you press number button 1 after
pressing M MODE, to operate the FM tuner.
To use these controls for original functions again,
wait for 15 seconds (or 30 seconds for Bluetooth
sources) without pressing any of these buttons until
the control is cleared.
• Pressing M MODE again also restores original
functions. However, pressing SEL makes the unit
enters a different mode.
Works as time countdown indicator.
EN02-07_KD-BT1_001A_2.indd 3 EN02-07_KD-BT1_001A_2.indd 3 3/5/07 11:30:46 AM 3/5/07 11:30:46 AM