English 18 – Инструкция по эксплуатации JVC KD-BT1
Страница 18
ENGLISH
18
Searching for available devices
Perform steps 1 – 3 on page 17, then...
1
Select “Search.”
The unit searches and displays the list of the
available devices.
• If no available device is detected, “Device not
found” appears.
2
Select a device you want to connect.
3
Enter the specific PIN code of the device to
the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
4
Use the Bluetooth device to connect.
Now connection is established and you can use the
device through the unit.
Connecting a special device
Perform steps 1 – 3 on page 17, then...
1
Select “Special Device.”
The unit displays the list of the preset devices.
2
Select a device you want to connect.
3
Use “Open” or “Search” to connect.
Connecting/disconnecting a registered device
1
Select
“Bluetooth Phone” or “Bluetooth
Audio.”
2
Select a registered device you want to
connect/disconnect.
3
Enter setting menu.
4
Select “Connect” or “Disconnect” to connect/
disconnect the selected device.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (See
“Auto Connect” on page 41.)
Deleting a registered device
1
Select
“Bluetooth Phone” or “Bluetooth
Audio.”
2
Select a registered device you want to delete.
EN16-23_KD-BT1_001A_2.indd 18
EN16-23_KD-BT1_001A_2.indd 18
2/7/07 11:34:30 AM
2/7/07 11:34:30 AM