Candy GO4 107 2D - Инструкция (Страница 53)

53
“Intensive” button
H
By pressing this button, which can only be activated in the Cotton cycles, the sensors in
the new “Sensor” system come into operation. They affect both the selected temperature,
keeping it at a constant level throughout the wash cycle, and the mechanical function of
the drum. The drum is made to turn at two different speeds at crucial moments. When the
detergent enters the garments, the drum rotates in such a way that the detergent is distrib-
uted in a uniform manner; during the wash and rinse procedures, however, the speed in-
creases in order to maximise the cleaning action. Thanks to this special system, the effi-
ciency of the wash procedure is improved WITHOUT ANY INCREASE IN THE LENGTH
OF THE PROGRAM.
"Spin speed" button
I
The spin cycle is very important to remove as much water as possible from the laundry
without damaging the fabrics. You can adjust the spin speed of the machine to suit your
needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the
spin cycle can be cancelled.
To reactivate the spin cycle is enough to press the button until you reach the spin speed
you would like to set.
For not damage the fabrics, it is not possible to increase the speed over that
automatically suitable during the selection of the program.
It is possible to modify the spin speed in any moment, also without to pause the ma-
chine.
NOTE: The machine is fitted with a special electronic device, which prevents the
spin cycle should the load be unbalanced. This reduces the noise and vibration in
the machine and so prolongs the life of your machine.