Candy GO4 107 2D - Инструкция (Страница 47)

47
Water supply
Connect the fill hose to the tap.
The appliance must be connected to the water mains using
new hose-sets. The old hose-sets should not be reused.
The appliance must only be connected to the cold water
supply.
Connection to a warm water supply, that is over 40°, may
damage certain delicate fabrics.
Note: it is advisable to turn off the tap after each wash
to isolate the washing machine from the water supply.
Position the washing machine next to the wall. Hook the
outlet tube to the edge of the bath tub, paying attention that
there are no bends or contractions along the tube,
It is better to connect the discharge hose to a fixed outlet of
a diameter greater than that of the outlet tube and at a
height of min. 50 cm.
If is necessary to use the plastic sleeve supplied.