Care and maintenance, Back panel sensor, Filter indicator – Инструкция по эксплуатации Sharp KCF31RW

Страница 33

Advertising
background image

ENGLISH

E-11

CARE AND MAINTENANCE

NOTE How to clean when overly dirty

1. Add a small amount of kitchen detergent to

water and soak for about 10 minutes.

• DO NOT apply excessive pressure when

scrubbing the back panel.
2.Rinse off the kitchen detergent with clean water.
3.Completely dry the filter in a well-ventilated area.

Gently remove dust with an appropriate cleaning tool,

such as a vacuum cleaner with the proper attachment.

1. Remove the Back Panel and removing

the Sensor Filter.

2. Gently remove dust from the Sensor with

an appropriate cleaning tool, such as a

vacuum cleaner with the proper attachment.

3. If the Sensor Filter is overly dirty, wash it

with water and dry it thoroughly.

BACK PANEL
SENSOR

CAUTION

E-11

CARE AND MAINTENANCE

The filter Indicator Light will turn

on

after approximately 720 hours.

(30 days × 24 hours =720 hours)

FILTER INDICATOR

After performing

maintenance, reset

the Filter Indicator.

ENGLIS

H

Press more than 3 seconds.

This is a reminder to perform the

maintenance described below.

(Ref.E-11,E-12,E-13,E-14)

CARE INDEX

Filter Frame

Humidifying Tray

Humidifying Filter

Back Panel

Sensor

Unit

HEPA Filter

(Ref.E-12,E-13)

(Ref.E-14)

(Ref.E-14)

Deodorizing Filter

(Ref.E-14)

SENSOR

BACK PANEL

In case of using at the location where air pollution and odor are significant,

maintain frequently even if Filter Indicator Light is not ON.

Back Panel

Sensor (internal)

Sensor Filter

Advertising