LG KG320 - Инструкция (Страница 174)

81
SETTINGS
SETTINGS
|
Change codes [Menu #-5-6]
PIN is an abbreviation of Personal Identification
Number to prevent use by unauthorized person.
You can change the access codes: Security code,
PIN code, PIN2 code.
1. If you want to change the Security code/PIN1/
PIN2 code input your original code, and then press
the left soft key < [OK].
2. Input new Security code/PIN/PIN2 code and verify
them.
Network
[Menu #-6]
You can select a network which will be registered
either automatically or manually. Usually, the
network selection is set to Automatic.
Network selection [Menu #-6-1]
You can select a network type.
• Automatic
If you select Automatic mode, the phone will
automatically search for and select a network for
you. Once you have selected “Automatic”, the
phone will be set to “Automatic” even though the
power is off and on.
• Manual
The phone will find the list of available networks
and show you them. Then you can select the
network which you want to use if this network has
a roaming agreement with your home network
operator. The phone let you select another
network if the phone fails to access the selected
network.
• Preferred
You can set a list of preferred networks and
the phone attempts to register with first, before
attempting to register to any other networks. This
list is set from the phone’s predefined list of known
networks.
Band selection [Menu #-6-2]
• EGSM/DCS
According to depending on Network situation, you
can select EGSM/DCS.
• PCS only
According to depending on Network situation, you
can select PCS only.
GPRS Attach
[Menu #-7]
You can set GPRS service depending on various
situations.
Switch on [Menu #-7-1]
If you select this menu, the phone is automatically
registered to a GPRS network when you switch the
phone on. Starting a WAP or PC dial-up application
created the connection between phone and network
and data transfer is possible. When you end the
application, GPRS connection is ended but the
registration to the GPRS network remains.
When needed [Menu #-7-2]
If you select this menu, the GPRS connection is
established when you connect a WAP service and
closed when you end the WAP connection.
Memory status
[Menu #-8]
You can check free space and memory usage of
each repository, Internal memory, and Multimedia
memory. You can go to each repository menu.
Reset settings
[Menu #-9]
You can initialize all factory defaults. You need
Security code to activate this function.
• Restore default settings: Allows you to restore
default settings.
• Clear multimedia memory: Allows you to format
the multimedia memory and create a default
directory.