Saturn ST-FP0043 - Инструкция (Страница 3)

4
¨ This appliance is intended for household
use only.
¨ This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given
supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
¨ Especially when operating the hand
blender attachment in hot liquids, do not
immerse the blender shaft into-or remove it
from the liquid while the appliance is
switched on.
¨ Children should be supervised to ensure
that they do not play with the appliance.
¨
Children are not allowed to use the
appliance without supervision.
¨
Do not touch the blades, especially
when the appliance is plugged in. The blades
are very sharp.
¨
If the blades get stuck, unplug the
appliance before you remove the ingredients
that block the blades.
¨
Always unplug the appliance when it is
left unattended and before you assemble,
disassemble,
clean, store, change
accessories or approach parts that move
during use.
¨
Care should be taken when handling the
sharp cutting blades, emptying the bowl and
during cleaning.
Setting the speed
When activating switch, the processing
speed corresponds to the setting of the
variable speed regulator. The higher the
speed setting, the faster and finer the
chopping results will be.
For maximum processing speed, press the
turbo switch. You many also use the turbo
switch for instant powerful pulses without
having to manipulate the speed regulator.
How to operate your hand blender
The hand blender is intended for:
- blending liquids, e.g. dairy products,
sauces, fruit juices, soups, mixed drinks and
shakes.
- mixing soft ingredients, e.g.
- pureeing cooked ingredients, e.g. for
making baby food.
1.
Attach the blender bar to the motor
unit (‘click’).
2.
Immerse the blade guard completely
in the ingredients.
3.
Pressing the normal or turbo speed
button to switch on the appliance.
4.
Move the appliance slowly up and
down and in circles to blend the ingredient.
When blending directly in the saucepan
while cooking, take the pan from the stove
first to protect the appliance from
overheating.
How to use you chopper
The chopper is intended for chopping meat,
cheese, onions, herbs, garlic, carrots,
walnuts, hazelnuts, almonds etc.
For chopping hard goods, use the turbo
switch.
Do not chop extremely hard food, such as
nutmeg, coffee beans and grains.
Before chopping
¨ Pre-cut meat, cheese, onions, garlic,
carrots, chillies.
¨ Remove stalks from herbs, un-shell
nuts
¨ Remove bones, tendons and gristle
from meat.
5
1. Place the blade on the centre pin of the
bowl and give it a turn to lock into
place.
2. Put the ingredients in the chopper
bowl.
3. Put the food processor lid onto the
chopper bowl. Turn the lid clockwise to
lock it.
4. Insert the motor unit into the coupling
unit until it locks.
5. Pressing the normal or turbo speed
button to switch the appliance.
6. After use, press release button to
remove the motor unit.
7. Turn the lid anti-clockwise to unlatch it
and lift it up.
8. Carefully take out the blade by turning
and pulling it, before removing the
processed food.
Mixing light dough
Using the chopper blade, you may also mix
light dough like a pancake batter or a cake
mixture based on up to 250g flour.
For a pancake batter, for instance, first pour
liquids into the bowl, then add flour and
finally eggs. Pressing the turbo switch, mix
the batter until smooth.
Slicing/shredding/grinder for potato
Use the slicing disc, you can slice cucumbers,
onions,
mushrooms, apples, carrots,
radishes, raw potatoes, courgettes,
cabbage.
Using the shredding disc, you can shred
apples, carrots, raw potatoes, beetroot,
cabbage, cheese (soft to medium).
Use the grinder disc, you can grind potato.
1. Place the blade support on the centre pin
of the bowl, place
slicing/shredding/grinder disc into blade
support and give it a turn to lock into
place.
2. Attach the food processor lid onto the
bowl. Turn it clockwise to lock the lid.
3. Insert the motor unit into the coupling
unit until it locks.
4. Fill the food to be processed into the
filling tube. Never reach into the filling
tube when the appliance is switched on.
Always use the pusher to feed in food.
5. Pressing the normal or turbo speed
button to switch the appliance.
The pusher – tips and warning
Do not exert too much pressure on the
pusher when you press ingredients down the
feed tube.
There are two kinds of pusher (a small one
and a big one) for this appliance:
1. Use the big pusher to push big blocks of
ingredients into the processing cup.
2. For slim material (such as ham,
cucumber, carrot etc.), put the material
trough the hole of big pusher, use the small
pusher to push it. The small pusher can be
taken out of the big pusher by turning it in
an anti-clockwise direction.
3. Pre-cut large ingredients to make them
fit into the feed tube.
4. Fill the feed tube evenly for the best
results.
Whisk
The whisk is intended for whipping cream,
whisking egg whites, desserts etc.