Vibe �oto� �n/�ff, Ot���� speed, D���/�et ��l�nce – Инструкция по эксплуатации Yamaha CP300
Страница 60: Ightness, H��monic content, Low ��equenc, Low g�in, This allows you to set the brightness of the sound, Main set?--> rotaryspeed slow, Main set?--> dry/wetbalance d58>w
0
Руководство пользователя CP300
Vibe �oto� �n/�ff*
Эта функция применима лишь для тембра «Вибра-
фон� и позволяет включать и отключать эффект виб-
рато (контролируемого колесом модуляции). Отобра-
жается только в том случае, если для параметра
“�ns.
���pe”
выбрана функция
“�ibe �otor”. когда выбран
тембр «Вибрафон�, эффект �ibe �otor включается
автоматически.
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: вкл/выкл
�ot���� Speed*
Позволяет устанавливать скорость вращения эффект
вращающейся колонки. Отображается только в том
случае, если для параметра
“�ns. ���pe”
выбрана функ-
ция
“�otar��”
ar��”
r��”
��””
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: быстро/медленно Slow/Fast
D���/�et ��l�nce*
Позволяет установить глубину дополнительного/
вставляемого эффекта. некоторые настройки
“�ns.
���pe”
не позволяют установить параметр
“Dr��/Wet
Balance.”
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: D63>W – D=W – D<W63
D63>W – воспроизведение практически первона-
чального звука без каких-либо эффектов
D=W – баланс практически равен
D<W63 – воспроизведение только звука с эффектом
��ightness*
Позволяет установить чистоту звука
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: -64 – +63
H��monic Content*
Позволяет настроить резонанс звука
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: -64 – +63
�� Low ��equenc��*
Позволяет отрегулировать низкую частоту эквалайзе-
ра части
ПРИМЕЧАНИЕ
детали по вопросам настройки эквалай-
зера смотрите на стр. �6
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: 32 Hz – 2.0 kHz
�� Low G�in*
Позволяет настроить прирост диапазона низкочас-
тотного эквалайзера (прирост/уменьшение низких
частот) эквалайзера части.
Detailed Settings for the Voices—Voice Edit
CP300 Owner’s Manual
60
Ref
erence
This applies only to the Vibraphone Voice and allows you
to turn the vibrato effect (controlled by the Modulation
wheel) on and off. This is displayed only if “Vibe Rotor” is
selected for the “Ins. Type” parameter. When the
Vibraphone Voice is selected, the Vibe Rotor effect is
automatically set to On.
Setting range: On/Off
This allows you to set the rotation speed of the rotary
speaker effect. This is displayed only if “Rotary” is selected
for the “Ins. Type” parameter.
Setting range: Slow/Fast
This allows you to set the depth of the Insertion effect.
Some “Ins. Type” settings do not allow you to set the “Dry/
Wet Balance.”
Setting range: D63>W – D=W – D<W63
D63>W (outputs only the original sound with almost no effect
applied)
D=W (dry/wet balance is even)
D<W63 (outputs only the sound processed by the effect)
This allows you to set the brightness of the sound.
Setting range: -64 – +63
This allows you to adjust the resonance of the sound.
Setting range: -64 – +63
This allows you to adjust the low-range frequency of the
part EQ.
n For details about EQ or Equalizer, refer to page 36.
Setting range: 32 Hz – 2.0 kHz
This allows you to adjust the low-range gain (amount of
boost/cut of the low frequencies) of the part EQ.
Setting range: -12 dB – +12 dB
Vibe Rotor On/Off*
Rotary Speed*
Dry/Wet Balance*
Main Set?-->
VibeRotorOnOff On
NO
YES
A
B
D
C
Main Set?-->
RotarySpeed Slow
NO
YES
A
B
D
C
Main Set?-->
Dry/WetBalance D58>W
NO
YES
A
B
D
C
Brightness*
Harmonic Content*
EQ Low Frequency*
EQ Low Gain*
Main Set?-->
Brightness 0
NO
YES
A
B
D
C
Main Set?-->
HarmonicContent 0
NO
YES
A
B
D
C
Main Set?-->
EQ LowFreq. 80
NO
YES
A
B
D
C
Main Set?-->
EQ LowGain 0
NO
YES
A
B
D
C
диапазон настройки: -12 dB – +12 dB
Подробные настройки для тембров – редактирование тембра